TST_RES(3)

NAME
tst_resm - Print result message

tst_resm_hexd - Print result message, including specified buffer in hexadecimal format

tst_brkm - Print result message and break remaining test cases

tst_old_flush - Print any messages pending because of CONDENSE mode, and flush output stream

tst_exit - Exit test with a meaningful exit value

tst_environ - Keep results coming to original stdout

SYNOPSIS
#include "test.h"

void tst_resm(int ttype, char *tmesg, [arg ...])

void tst_resm_hexd(int ttype, const void *buf, size_t size, char *tmesg, [arg ...])

void tst_brkm(int ttype, void (*func)(), char *tmesg, [arg ...])

void tst_old_flush()

void tst_exit()

int tst_environ()

extern int tst_count;
extern int tst_range;

DESCRIPTION

  Introduction
This library of functions are used by UNICOS tests to report results to standard output in a consistent manner. It is assumed that tests using this library have a distinct number of test cases, and that each test case is distinct and uniquely identified by the test case number. It is also assumed that test case results are printed in consecutive order, starting with 1. The library maintains a set of global variables (TCID, TST_TOTAL, tst_count), which are used by the various functions to format the results and to keep track of the current result reporting state (i.e. how many total test cases there are, and how many have been reported so far) for the calling test.

The TCID and TST_TOTAL global variables are externed in the library, and MUST be defined/initialized by tests using the library. TCID must be set to the Test Case IDentifier, and TST_TOTAL must be set to the total number of test cases that will be reported.

The other global variables are available as externs to tests linked with tst_res.o. tst_count is the running count of the number of test results that have been reported so far. The library initializes it to 0, and it should not be modified by the test. The details are described below under the appropriate functions.

  Arguments

    ttype
        test result type; one of TPASS, TFAIL, TBROK, TCONF, TWARN, or TINFO (explained below).

    fname
        pointer to a character string holding the name of a file whose contents will be printed on a new line following tmesg. If this pointer is NULL, it is ignored.

    tmesg, [arg ...]
        pointer to a character string containing a message explaining the test result. This character string can contain percent-sign conversion specifications as in printf(3C) with corresponding arg arguments following the tmesg argument.
        NOTE: These routines use static space internally to hold the expanded message. The maximum size allowed for an expanded message is 2048 bytes.

    func
        pointer to a function which performs either the cleanup necessary prior to exiting the test or some function executed at the end of each iteration of a loop.

    buf pointer to a buffer whose contents will be printed in hexadecimal format.

    size
        size of the buffer.

  Result Types
The possible test result types defined in test.h are as follows:

    TPASS
        The test case produced expected results.

    TFAIL
        The test case produced unexpected results.

    TBROK
        A resource needed to execute the test case was not available (e.g. a temporary file could not be opened).

    TCONF
        The test case was not appropriate for the current hardware or software configuration (e.g. MLS was not enabled).

    TWARN
        The testing procedure caused undesirable side effects that did not affect test results (e.g. a temporary file could not be removed after all test results were recorded).

    TINFO
        An informative message about the execution of the test that does not correspond to a test case result and does not indicate a problem.

  Function Descriptions

tst_resm() and tst_resm_hexd() are the basic result reporting functions. They report 1 or more test case results of the specified ttype. All result types are valid for these functions. The tst_range global variable indicates the number of results that will be reported for each call to one of these functions. It is initialized by the library to 1, but may be set to a value > 1 by the test. Each call to one of these functions will result in tst_range test case results being reported, each with an identical message (tmesg). tst_range is always reset to 1 by the library before returning to the caller.

tst_brk() and tst_brkm() are used to report results for all test cases remaining in the test, and then call a cleanup function. The only result types that are valid for these functions are: TFAIL, TBROK, and TCONF. When called with a ttype of TFAIL or TBROK, one result of the specified ttype will be printed, followed by results of type TBROK for the remaining test cases. When called with a ttype of TCONF, the specified ttype will be printed for all remaining test cases. If func is not NULL, tst_brk() and tst_brkm() will call func after all results have been printed. If the call to func returns, tst_brk() and tst_brkm() will then call tst_exit(). If func is NULL, tst_brk() and tst_brkm() return to the caller after all results have been printed. If tst_brk() is called with a fname argument, the contents of the file will only be printed for the first reported result. tst_brk() takes the fname argument whereas tst_brkm() does not.

tst_old_flush() is used to print any results pending because of CONDENSE or NOPASS modes (described below), and flushes the output stream.

tst_exit() is used to allow tests to exit with a meaningful exit value. A bit is set in the exit value for each of the non passing test case result types (TFAIL, TBROK, and TWARN) encountered by the library. Thus any bit which is set in the exit value indicates that the corresponding result flag was used at least once in the test run.

The current bit fields for the result types are as follows:

    TPASS
        0000    /* .... .... */

    TFAIL
        0001    /* .... ...1 */

    TBROK
        0002    /* .... ..1. */

    TWARN
        0004    /* .... .1.. */

    TINFO
        0020    /* ...1 .... */

    TCONF
        0040    /* ..1. .... */

NOTE: TPASS and TINFO do not have an effect on the test program exit status.

tst_environ() is used to ensure that results reported by this library will go to the original stdout, even if the test changes the original stdout to another file, or closes it. A test may want to do this in order to redirect output that normally goes to stdout (e.g. printf() output) to a file. tst_environ() returns 0 upon successful completion, and -1 if it encountered any problems.

  Output Modes
Four output display modes are supported by the tst_resm() family of functions to enhance output readability. The active mode is controlled via the environment variable TOUTPUT, which must be set prior to the start of the test in order to have any effect (see ksh(1) for information on environment variables). The supported modes are as follows:

    VERBOSE
        A test result output line is generated for each test result. This is the default mode.

    CONDENSE
        Consecutive, identical PASS, FAIL, BROK, CONF, and RETR test results are condensed into one output line. The test case number field contains the range of results involved. WARN and INFO output lines are not condensed, but printed as usual.

    NOPASS
        All PASS, CONF, INFO, and RETR output lines are discarded (i.e. not printed), and consecutive, identical FAIL and BROK output lines are condensed as in CONDENSE mode. WARN output lines are printed as usual.

    DISCARD
        All output lines are discarded.

EXAMPLES
#include "test.h"

char *TCID = "tsttcs01"; /* set test case identifier */
int TST_TOTAL = 15;      /* set total number of test results */

main()
{
		.
		.
	/* a successful test result */
	tst_resm(TPASS, "what was tested");
		.
		.

	/* break all remaining test results */
	tst_brkm(TBROK, cleanup, "what didn't work");
		/* or */
	tst_brk(TBROK, file, cleanup, "what didn't work");
		.
		.

	/* exit after all test results have been passed to tst_res */
	tst_exit();
}

Sample output:
    tsttcs01    1       PASS  :  Able to create MAXUP processes
    tsttcs01    2       FAIL  :  Too many processes (MAXUP+1) created
    tsttcs01    3       BROK  :  tabinfo(PROCTAB, &tbs) failed; errno = 13: Permission denied

SEE ALSO
tst_setup(1), printf(3C), ksh(1).

DIAGNOSTICS

A WARN result message will be printed if any of the following occur:

    If an invalid test type is specified.

    If tst_count is negative.

    If one of the tst_brk[m]() routines is called with a test type other than TFAIL, TBROK, TCONF.

    If there are any problems opening/reading/writing the contents of fname.

LIMITATIONS
If fname is NULL and tmesg is NULL or empty, the result message will be empty. This allows a test to not print a message for a result, but it is not advised.

NOTES
In multithreaded environment, output of tst_resm_hexd() may be interleaved with messages produced by other threads.

BUGS

The programmer is free to alter the value of tst_count causing possible test result order problems.