service-name.config(5)

NAME
service-name.config - ConnMan service provisioning file

SYNOPSIS
/var/lib/connman/service-name.config

DESCRIPTION

ConnMan's services are configured with so called "provisioning files" which reside under /var/lib/connman/. The files can be named anything, as long as they end in .config. The provisioning files can be used to configure for example secured wireless access points which need complex authentication, for example eduroam, or for static IPs and so on. Each provisioning file can be used for multiple services at once.

FILE FORMAT

The configuration file consists of sections (groups) of key-value pairs. Lines beginning with a '#' and blank lines are considered comments. Sections are started by a header line containing the section enclosed in '[' and ']', and ended implicitly by the start of the next section or the end of the file. Each key-value pair must be contained in a section.

Description of sections and available keys follows:

  [global]
This section is optional, and can be used to describe the actual file. The two allowed fields for this section are:

Name=name
    Name of the network.

Description=description
    Description of the network.

  [service_*]
Each provisioned service must start with a [service_*] tag, with * replaced by an unique name within the file. The allowed fields are:

Type=ethernet | wifi
    Mandatory. Other types than ethernet or wifi are not supported.

IPv4=off | dhcp | network/netmask/gateway
    IPv4 settings for the service. If set to off, IPv4 won't be used. If set to dhcp, dhcp will be used to obtain the network settings. netmask can be specified as length of the mask rather than the mask itself. The gateway can be omitted when using a static IP.

IPv6=off | auto | network/prefixlength/gateway
    IPv6 settings for the service. If set to off, IPv6 won't be used. If set to auto, settings will be obtained from the network.

IPv6.Privacy=disabled | enabled | preferred
    IPv6 privacy settings as per RFC3041.

MAC=address
    MAC address of the interface to be used. If not specified, the first found interface is used. Must be in format ab:cd:ef:01:23:45.

Nameservers=servers
    Comma separated list of nameservers.

SearchDomains=domains
    Comma separated list of DNS search domains.

Timeservers=servers
    Comma separated list of timeservers.

Domain=domain
    Domain name to be used.

The following keys can only be used for wireless networks:

Name=name
    A string representation of an network SSID. If the SSID field is present, the Name field is ignored. If the SSID field is not present, this field is mandatory.

SSID=ssid
    SSID: A hexadecimal representation of an 802.11 SSID. Use this format to encode special characters including starting or ending spaces.

Passphrase=passphrase
    RSN/WPA/WPA2 Passphrase.

Security=type
    The security type of the network. Possible values are psk (WPA/WPA2 PSK), ieee8021x (WPA EAP), none and wep. When not set, the default value is ieee8021x if an EAP type is configured, psk if a passphrase is present and none otherwise.

Hidden=true | false
    If set to true, then this AP is hidden. If missing or set to false, then AP is not hidden.

The following keys are used for WPA EAP (when Security=ieee8021x):

EAP=tls | ttls | peap
    EAP type to use. Only tls, ttls and peap are supported.

CACertFile=file
    Path to the CA certificate file. Only PEM and DER formats are supported.

PrivateKeyFile=file
    Path to the private key file. Only PEM, DER and PFX formats are supported.

PrivateKeyPassphrase=passphrase
    Passphrase of the private key.

PrivateKeyPassphraseType=fsid
    If specified, use the private key's fsid as the passphrase, and ignore the PrivateKeyPassphrase field.

Identity=identity
    Identity string for EAP.

AnonymousIdentity=identity
    Anonymous identity string for EAP.

SubjectMatch=substring
    Substring to be matched against the subject of the authentication server certificate for EAP.

AltSubjectMatch=substring
    Semicolon separated string of entries to be matched against the alternative subject name of the authentication server certificate for EAP.

DomainSuffixMatch=domain
    Constraint for server domain name. If set, this FQDN is used as a suffix match requirement for the authentication server certificate for EAP.

DomainMatch=domain
    This FQDN is used as a full match requirement for the authentication server certificate for EAP.

Phase2=type
    Inner authentication type with for EAP=tls or EAP=ttls. Prefix the value with EAP- to indicate usage of EAP-based authentication method (should only be used with EAP=ttls).

EXAMPLE

  Eduroam
This is a configuration file for eduroam networks. This file could for example be /var/lib/connman/eduroam.config. Your university's exact settings might be different.

[service_eduroam]
Type = wifi
Name = eduroam
EAP = peap
Phase2 = MSCHAPV2
CACertFile = /etc/ssl/certs/UNIV_CA.crt

  Complex networking
This is a configuration file for a network providing EAP-TLS, EAP-TTLS and EAP-PEAP services. The respective SSIDs are tls_ssid, ttls_ssid and peap_ssid and the file name could be /var/lib/connman/complex.config.

Please note that the SSID entry is for hexadecimal encoded SSID (e.g. "SSID = 746c735f73736964"). If your SSID does not contain any exotic character then you should use the Name entry instead (e.g. "Name = tls_ssid").

[global]
Name = Example
Description = Example network configuration

[service_tls]
Type = wifi
SSID = 746c735f73736964
EAP = tls
CACertFile = /home/user/.certs/ca.pem
ClientCertFile = /home/user/devlp/.certs/client.pem
PrivateKeyFile = /home/user/.certs/client.fsid.pem
PrivateKeyPassphraseType = fsid
Identity = user

[service_ttls]
Type = wifi
Name = ttls_ssid
EAP = ttls
CACertFile = /home/user/.cert/ca.pem
Phase2 = MSCHAPV2
Identity = user

[service_peap]
Type = wifi
Name = peap_ssid
EAP = peap
CACertFile = /home/user/.cert/ca.pem
Phase2 = MSCHAPV2
Identity = user

[service_home_ethernet]
Type = ethernet
IPv4 = 192.168.1.42/255.255.255.0/192.168.1.1
IPv6 = 2001:db8::42/64/2001:db8::1
MAC = 01:02:03:04:05:06
Nameservers = 10.2.3.4,192.168.1.99
SearchDomains = my.home,isp.net
Timeservers = 10.172.2.1,ntp.my.isp.net
Domain = my.home

[service_home_wifi]
Type = wifi
Name = my_home_wifi
Passphrase = password
IPv4 = 192.168.2.2/255.255.255.0/192.168.2.1
MAC = 06:05:04:03:02:01

SEE ALSO
connman(8)