IR-KEYTABLE(1)

NAME
ir-keytable - a swiss-knife tool to handle Remote Controllers.

SYNOPSIS
ir-keytable [OPTION]... --device [/dev/input/event* device]
ir-keytable [OPTION]... --sysdev [ir class (f. ex. rc0)]
ir-keytable [OPTION]... [for using the rc0 sysdev]

DESCRIPTION
ir-keytable is a tool that lists the Remote Controller devices, allows one to get/set IR keycode/scancode tables, test events generated by IR, and to adjust other Remote Controller options.

Note: You need to have read permissions on /dev/input for most of the options to work.

OPTIONS

-a, --auto-load=CFGFILE
    Auto-load a table, based on a configuration file. Only works with sysdev.

-c, --clear
    clears the old table

-d, --device=DEV
    ir device to control

-D, --delay=DELAY
    Sets the delay before repeating a keystroke

-k, --set-key=SCANKEY
    Change scan/key pairs

-p, --protocol=PROTOCOL
    Protocol to enable (the other ones will be disabled). To enable more than one, use the option more than one time

-P, --period=PERIOD
    Sets the period to repeat a keystroke

-r, --read
    reads the current scancode/keycode table

-s, --sysdev=SYSDEV
    ir class device to control

-t, --test
    test if IR is generating events

-v, --verbose
    enables debug messages

-w, --write=TABLE
    write (adds) the scancodes to the device scancode/keycode table from the specified TABLE file

-?, --help
    Prints the help message

--usage
    Give a short usage message

-V, --version
    print the v4l2-utils version

Mandatory or optional arguments to long options are also mandatory or optional for any corresponding short options. Options can be combined together.

  The options arguments are:

DEV the /dev/input/event* device to control

SYSDEV
    the ir class as found at /sys/class/rc

TABLE
    a file wit a set of scancode=keycode value pairs

SCANKEY
    a set of scancode1=keycode1,scancode2=keycode2.. value pairs

PROTOCOL
    protocol name (nec, rc-5, rc-6, other) to be enabled

DELAY
    Delay before repeating a keystroke

PERIOD
    Period to repeat a keystroke

CFGFILE
    configuration file that associates a driver/table name with a keymap file

EXIT STATUS
On success, it returns 0. Otherwise, it will return the error code.

EXAMPLES
To list all connected Remote Controller devices:
    ir-keytable

To clean the keycode table and use a newer one:
    ir-keytable -c -w /etc/rc_keymaps/nec_terratec_cinergy_xs

To append more codes to the existing table:
    ir-keytable -w /etc/rc_keymaps/nec_terratec_cinergy_xs

To read the current keytable, on the second remote controller:
    ir-keytable -s rc1 -r

BUGS
Report bugs to Mauro Carvalho Chehab <mchehab@redhat.com>

COPYRIGHT
Copyright (c) 2010-2011 by Mauro Carvalho Chehab <mchehab@redhat.com>.

License GPLv2: GNU GPL version 2 <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.